|Main Page --- Tools / Other Tools|
|There is nothing worse than ruining a perfectly good tool by banging it on the wrong thing. And if you think a wooden board is the right thing, then you'll go through tools real fast! |
These pounding (also known as protecto or poundo) boards are a rubber composite, specifically made to absorb the force of a cutting tool, and protect the edges. Not a wimpy board, these are 7/32" or just under 1/4" thick and very dense. Unfortunately, with that density comes weight. They ship at 3-4 pounds, and if it is all you order our cart will probably underestimate the freight. If you would like to know the final charges before we ship, just add a note in your comments box at check out, and will will quote you and wait for your response before invoicing your card.
With extremely hard use (8 hours a day, 5 days a week), we get about 6 months of pounding on a 12 X 12 board... you do the math. It is a cheap way to protect your tools.
|Indicate quantity, then press add to cart|
|11 2/3" X 11 2/3" |
|11 2/3" X 23 1/3" |
These are intended to be 12" X 12" or 24" X 12", but sometimes in the extruding process the edges get a little "funny"
and need to be trimmed before cutting. Your board will be at least the size indicated.