Main Page   Go To Your Shopping Basket

Shiny Black Plated O-Rings

O-rings for leather craft
These are O rings which are formed by bending stock wire into the correct shape, and then applying a weld to the point where they join. The rich black finish is applied after that process is complete. This differs from cast rings, which are poured as molten metal into a mold, and the resulting product is without a weld, and one solid piece. The welded wire rings (these) are by far both the most common, and the least expensive.

These are shiny black, not gunmetal (dull) black, and have a beautiful sheen!

These have a myriad of uses, in leather, fashion, and industrial trades.

We provide 2 measurements, the first, in inches, is the inner diameter of the ring. The second is the thickness, in millimeters, of the material itself.

Select the item(s) you wish to order, by indicating quantities, then press add to cart
  1-9 Pieces Packs of 10 Packs of 50 Packs of 100
Item Click for
Close up
Thickness * Enter Quantity $ Each Enter Quantity $ per 10 Enter Quantity $ per 50 Enter Quantity $ per 100
1 1/4 inch O ring
1 1/4 inch heavy O ring thumbnail 5.7mm

(0.450 each)

(0.390 each)

(0.330 each)
1 1/2 inch O ring
1 1/2 inch heavy O ring thumbnail 6.2mm
(0.500 each)

(0.440 each)

(0.365 each)
1 3/4 inch O ring
1 3/4 inch heavy O ring thumbnail 6mm
(0.550 each)

(0.480 each)

(0.405 each)
2 inch O ring
2 inch heavy O ring thumbnail 6.6mm
(0.890 each)

(0.770 each)

(0.650 each)
*A penny is 1.55mm thick, a mm is a little less than 1/16 of an inch. A nickel is almost exactly 2mm thick.

Go To Your Shopping Basket

This item is sold in "pre-packs". This means that only full quantities of even 50 pieces receive the 50 piece price,
100 receive the 100 piece price, and so forth.

Main Page      Contact Us      Your Security      Pricing Information      Privacy Policy         Acceptable Use of Products      About Us