Main Page ↩ Previous     Next ↪ Go To Your Shopping Basket

Heavy D Rings

Heavy D rings for the leather and crafts trades
Here we offer what we refer to as our "heavy D" selection. These are big and bulky D rings that are ideal for use in applications such as dog collars, plant hangers, belts, and many other uses where a D that can support some serious weight is needed. These are formed by bending stock wire into the correct shape, and then applying a weld to the point where they join. The finish is applied after that process is complete. This differs from cast rings, which are poured as molten metal into a mold, and the resulting product is without a weld, and one solid piece. The welded wire rings (these) are by far both the most common, and the least expensive.

We provide 2 measurements, the first, in inches, is the inner diameter of the ring, this is measured at the straight part of the D, and, therefore, is the size of the material which will fit correctly into the ring. This dimension is just slightly generous (a 2" ring may measure 2.05") so that there is no binding. The second is the thickness, in millimeters, of the material itself.

Separately we offer our brass D rings , our Light Weight D rings , and our cast D rings , which are much smaller and lighter.

Please see sizes available in the chart below.

In response to requests we are taking close up photos of all our hardware. We are in the process of adding them as fast as possible.
If available, you may click on the small image next to the items in the table below to see a close up photo.

Select the item(s) you wish to order, indicating quantities, then press add to cart
  1-9 Pieces Packs of 10 Packs of 50 Packs of 100
Item /
Stock #
Click for
Close up
Thickness* Enter Quantity $ Each Enter Quantity $ per 10 Enter Quantity $ per 50 Enter Quantity $ per 100
3/4 inch heavy D ring thumbnail 4.7 mm
(0.285 each)

(0.240 each)

(0.195 each)
5.2 mm
(0.300 each)

(0.260 each)

(0.205 each)
1 inch heavy D ring thumbnail 5.2 mm
(0.320 each)

(0.270 each)

(0.220 each)
Please note:

The balance of the items in this section are quite heavy, especially 100 packs,
and the constraints of our shopping cart (as nice as it is for our custom work, it does have limitations),
may seriously understimate your freight charges. We will ship the least expensive way, charging actual freight costs.
We always take advantage of flat and regional rate boxes to save you all we can,
but if you would like to know what the charges are before we proceed, we will be more than glad to email you the price.
Just ask for a freight quote first by using your comments box during checkout.
Remember, we NEVER charge your card before we actually ship. It is not charged at check out.

1 1/4"
6.2 mm
(0.380 each)

(0.330 each)

(0.280 each)
1 1/2"
1 1/2 inch heavy D ring thumbnail 6.2 mm
(0.450 each)

(0.390 each)

(0.330 each)
1 3/4"
1 3/4 inch heavy D ring thumbnail 6.5 mm
(0.530 each)

(0.460 each)

(0.390 each)
2 inch heavy D ring thumbnail 6.5 mm
(0.560 each)

(0.490 each)

(0.420 each)
3 inch heavy D ring thumbnail 9.5 mm
(2.790 each)

(2.420 each)

(2.035 each)
*A penny is 1.55mm thick, a mm is a little less than 1/16 of an inch. A nickel is almost exactly 2mm thick.

Go To Your Shopping Basket

This item is sold in "pre-packs".
This means that only full quantities of even 50 pieces receive the 50 piece price,
100 receive the 100 piece price, and so forth.

Main Page      Contact Us      Your Security      Pricing Information      Privacy Policy         Acceptable Use of Products      About Us